
Contador 2
Operating Instructions
Page 30 of 46
Revision 7
© 2019 – Pfeuffer GmbH
7.3
Selecting the feed container
The positioned feed container is detected automatically. The bottom of the containers are provided
with magnets which are used to detect the number, and the associated parameters for the light barrier
and feed are selected automatically.
At present you can choose from four different feed containers:
Figure 27: Feed container
Pos.
Name
1
Container no. 1 for rapeseed and fine seeds
2
Container no. 2 for grain
3
Container no. 3 for maize and legumes
4
Container no. 4 for fine seeds
Chapter 5.3
offers a selection aid for tested seeds.
Selecting the counting menu for containers
The CONTADOR 2 works with an automatic container detection.
In the counting menu, you can set the container number manually using the
++
or
--
keys.
container no.
01
↑
++
OK
--
Independent settings for any container can be set, saved and called up under container numbers 8 to
15. The actual container number is then ignored.
If you want to set different values for a container, then contact the Pfeuffer GmbH.
1
2
3
4