14 Accessories
14.1 Accessory information
Display and control units
Display and operating units are used to check and adjust operating parameters.
Power packs
Power packs for fastening to the wall and standard rails or for rack assembly serve the voltage supply.
Cable and adapter
Mains, interface, connection, and extension cables provide a secure and suitable connection. Different
lengths on request
Base plate with rubber feet
The base plate with rubber feet serves to reduce vibrations.
14.2 Ordering accessories
Selection field
Order number
Tube connection DN 6 x 400 mm with straight fitting G 1/8" and G 1/4" including
seal
P 0920 739 E
Tube connection DN 6 x 1000 mm with straight fitting G 1/8" and G 1/4" including
seal
P 0920 817 E
Hose DN 6; (ø 8/6 mm) polyethylene
P 0991 939
Push-in fitting G 1/8" including seal for hose connection (8/6 mm)
P 4131 029 G
Push-in T-fitting G 1/8"
P 4131 030 E
Mains cable 230 V AC, CEE 7/7 to C13, 3 m
P 4564 309 ZA
Mains cable 115 V AC, NEMA 5-15 to C13, 3 m
P 4564 309 ZE
Mains cable 115/230 V without plug, socket (straight), 3 m
P 4564 309 ZH
Y-Connector M12 to RS-485
P 4723 010
Connection cable MVP-TC-TPS, 3 m
PE 100 013 -T
Screw-in flange DN 16 ISO-KF / G 1/8" incl. seal
PK 050 108 -T
Foot plate with rubber feet
PK 050 273
HPU 001, Handheld programming unit
PM 051 510 -T
USB converter to RS-485 interface
PM 061 207 -T
Interface cable, M12 m straight/M12 m straight, 3 m
PM 061 283 -T
TPS 110, power supply pack for wall/standard rail fitting
PM 061 340 -T
TPS 111, power supply pack 3HU 19" rack module
PM 061 344 -T
DCU 002, Display Control Unit
PM 061 348 AT
DCU 110, Display control unit with power supply pack
PM C01 820
Connection cable with RS-485 interface for TC 110/120 to power supply pack
PM 061 350 -T
Connection cable for HiPace with TC 110/120
PM 061 543 -T
Tbl. 23:
Accessories MVP 010-3 DC
Accessories
48/52
