background image

About this manual

3

1

About this manual

1.1

Validity

This operating manual is for customers of Pfeiffer Vacuum. It describes the functioning 
of  the designated product and provides the most important information for safe use of 
the unit. The description follows applicable EU guidelines. All information provided in this 
operating manual refers to the current state of the product's development. The documen-
tation remains valid as long as the customer does not make any changes to the product.
Up-to-date operating instructions can also be downloaded from www.pfeiffer-vacu-
um.com. 

1.2

Conventions

Safety instructions

The safety instructions in Pfeiffer Vacuum operating instructions are the result of risk 
evaluations and hazard analyses and are oriented on international certification stan-
dards as specified by UL, CSA, ANSI Z-535, SEMI S1, ISO 3864 and DIN 4844. In this 
document, the following hazard levels and information are considered:

Backing pump relay boxes

Order number

Relay box, shielded, for backing pumps, 1-phase 7A for TC 110 
and TCP 350, M8

PM 071 282 -X

Relay box, shielded, for backing pumps, 1-phase 20 A for TC 110 
and TCP 350, M8

PM 071 283 -X

Relay box, shielded, for backing pumps, 1-phase 7 A for TC 400/
1200, TM 700 and TCP 350, M12

PM 071 284 -X

Relay box, shielded, for backing pumps, 1-phase 20 A for TC 400/
1200, TM 700 and TCP 350, M12

PM 071 285 -X

DANGER

Imminent danger

Indicates an imminent hazardous situation that will result in death or serious injury.

WARNING

Possibly imminent danger

Indicates an imminent hazardous situation that can result in death or serious injury.

CAUTION

Possibly imminent danger

Indicates an imminent hazardous situation that can result in minor or moderate injury.

NOTICE

Command or note

Command to perform an action or information about properties, the disregarding of 
which may result in damage to the product.

Summary of Contents for HiPace PM 071 282-X
















Reviews: