Information for transport of the vacuum pump without packaging
For transport without packaging, HiCube Pro turbopump stations are equipped with recesses on the
side of the housing frame.
1. Remove the protective caps from the recesses.
2. Attach suitable lifting devices to at least 3 attachment points.
3. Pay attention to the correct use and fastening of the lifting equipment.
4. Lift the pumping station vertically (e.g. out of packaging).
5. Place the turbo pumping station securely on an adequately sized, level surface.
6. Insert protective caps into the recesses of the attachment points.
7. Release the transportation lock prior to commissioning at the installation location.
4.2 Transport lock
Backing pumps in HiCube line turbopump stations are secured against damage during transport.
Handling the transport lock
1. Release the backing pump transport lock, only directly prior to commissioning at the installation
location.
2. Observe the installation instructions .
4.3 Store pumping station
Packing
We recommend storing the product in its original packaging.
1. Seal the flange opening with the original protective cover.
2. Close all other connections (e.g. exhaust) with the corresponding protective covers.
3. Store the vacuum pump only in dry, dust-free rooms, within the specified ambient conditions.
4. In rooms with humid or aggressive atmospheres: Hermetically seal the turbo pumping station, to-
gether with a drying agent, in a plastic bag.
Transportation and Storage
22/80
