12 Spare parts
12.1 Operating fluids – Maintenance level 1
Select the respective operating fluid type and quantity under consideration of the details on the rating
plate.
Description
Order number
P3, mineral oil, 1 l
PK 001 106 -T
P3, mineral oil, 5 l
PK 001 107 -T
P3, mineral oil, 20 l
PK 001 108 -T
D1, synthetic diester based oil, 1 l
PK 005 875 -T
D1, synthetic diester based oil, 5 l
PK 005 876 -T
Tbl. 11:
Consumables
12.2 Maintenance kit – maintenance level 1
The maintenance kit contains:
● Filler and drain screw seals for one operating fluid change
● Seals of the separator cover plate for cleaning the oil chamber
● Exhaust filter
● Operating fluid filter
● Filter material
12.3 Overhaul kit – maintenance level 3
The overhaul kit contains all the wear parts of the vacuum pump that must be replaced after the vacuum
pump has been dismantled and cleaned:
● Set of seals with all seals relevant for the function
● Bearing
● Intake strainer
● Operating fluid and exhaust filters
● Wearing parts of the valves
● Coupling sleeve
12.4 Set of seals
The set of seals contains:
● all seals from the main- and sub-assemblies,
● Radial shaft seal rings (RSSR)
12.5 Set of vanes
The set of vanes contains:
● Vane
12.6 Ordering spare parts packages
Procedure
1. Have the vacuum pump part number to hand, along with other details from the rating plate.
2. Install original spare parts only.
Spare parts
53/62
