11.1.2 Maintenance kit 1 – maintenance level 1
Maintenance kit 1 contains the filler and drain screw seals for an operating fluid change, and the seal of
the cap for cleaning the oil chamber. It also contains the seals and wearing parts for cleaning the gas
ballast valve.
6
4
5
2
2
1
3
3
2
10
12
11
9
7
8
C-Version/
C version
Fig. 28:
Maintenance kit 1
Item no.
Designation
Size
Shipment
1
O-ring, FPM
270 x 5
1
2
O-ring, FPM
24 x 2.5
3
3
O-ring, FPM
5 x 1.5
2
4
Cheesehead screw
M4 x 6
1
5
Plate spring
—
1
6
O-ring, FPM
6 x 2.2
1
7
O-ring, FPM
27 x 2.5
1
8
O-ring, FPM
12 x 1.5
1
9
O-ring, FPM
2.1 x 1
1
10
O-ring, FPM
10 x 2.5
1
11
O-ring, FPM
38 x 3
1
12
O-ring, FPM
15 x 2.5
2
of which 1 is for ODK connection (not shown in figure)
Tbl. 16:
Order no.: PK E01 050 CT
11.1.3 Overhaul kit and set of seals
The overhaul kit contains all the wearing parts of the pump, which must be replaced after the pump is
dismantled and cleaned. It consists of:
● set of seals with all seals from the main- and sub-assemblies,
● wearing parts of the pumping system (including vane and springs),
● wearing parts of the valves,
● and the coupling spider.
11.1.4 Set of vanes
The set of vanes contains:
Spare parts
52/66
