Pfaff selectline Page 47 Owner'S Manual Download

Page: 47 / 52

3:3

Maintenance and tr

ouble-shooting

Changing the sewing bulb

Switch off the main switch.

• Disconnect the main plug and the foot

control plug from the machine.

• Take off the removable accessory tray

(15).

The sewing bulb is located inside the left

side of the sewing machine.

Removal:

• Hold the sewing machine tightly.

• Push the bulb into its socket as far as

it will go.

• At the same time, turn the bulb a half

turn anti-clockwise and remove it.

Insertion:

• Insert the bulb in the diagonal socket

and turn it so that both stops of the bulb

engage.

• Now push the bulb fully into the

socket and turn it clockwise so that it is

held

rmly.

Note: The bulb changer (available as a

special accessory) will make changing the

bulb much easier.

Important!

The maximum allowed wattage of the

bulb with a plug-in socket is 15 watts!

Summary of Contents for selectline




















































Search results

Summary of Contents for selectline

Reviews:

Related manuals for selectline

Brands by name

Popular brands

Pfaff selectline, Owner'S Manual

Search results

Summary of Contents for selectline

Reviews:

Related manuals for selectline

Brands by name

Popular brands