Sealing
47
10
.06
Programmed sealing with individual programs
In the headline, in addition to the program number of the selected program, the number of
zones, the current zone and the comment for the program are displayed. For the current
zone all heat-sealing parameters are displayed. The heat-sealing parameters have been stipu-
lated during programming and cannot be processed without changing the program.
Select the desired program, see Chapter
9.02 Selecting a program
.
●
Description of the functions
Program selection
The function opens the menu for entering the program number or for choosing the
production type, see Chapter
9.02 Selecting a program
.
Notepad
This function opens the notepad with program details about the heat-sealing tools to
be used.
Basting
This function opens a menu for entering the sealing parameters for basting, see Chapter
10.04
Basting
.
Start
(This function appears, when the top feed roller is lowered.)
This function is used to call up the sealing start, analog to pedal function "+2", also see
Chapter
7.03 Pedal
.
Feed roller up/down
This function is use to raise or lower the top feed roller, depending on its position, analog to
the pedal functions "-1" and "+1", also see Chapter
7.03 Pedal
.
Turn rollers
This function opens the menu for turning the rollers, see Chapter
10.10 Turning the rollers.
Programming
These functions are used to enter the Creating or Altering Heat-Sealing Programs, see
Chapter
10.03
Creating/altering sealing programs
.
Input menu
This function is used to call up the "Input" mode, see Chapter
11 Input
.