Pfaff 1180 U Series, Supplement To Instruction Manual, Page: 19 / 32

Parameter Settings
19
The standard values listed in the table are basic settings, which can be altered if
necessary.
For more displays and information see the motor instruction manual.
6 Parameter Settings
Group Parameter Description Access level Adjustment range Standard value
2 251 Presser foot clearance when raised
by pedal (pedal position –2)
B, C 0 - 255 160
252 Presser foot clearance when raised
by knee switch
B, C 0 - 255 150
256 Min. presser foot pressure during sewing B, C 0 - 32 10
258 Machine feed type
1 = needle feed, 0 = bottom feed
B, C 0 - 1 0
287 Presser foot clearance when raised
by pedal (pedal position –1)
B, C 0 - 255 150
288 Presser foot holding pressure while the
M/C is stoped
B, C 0 - 255 80
6
607 Maximum speed B, C 300 - 5500 4000
660 Bobbin thread monitoring
0 = off
1 = by sensor (-926/06)
2 = by stitch counting
B, C 0 - 2
1180
= 1
938 U
= 0
7
700 Needle position 0
(needle reference position
B, C 0 - 255
*
702 Needle position 1 (needle lowered) B, C 0 - 255 90
703 Needle position 2 (take-up lever raised) B, C 0 - 255 236
760 Multiplier for the fixed value (200) for
stitch count
A,B, C 0 - 250 5
799 Selected machine class C 1 - 2 1
8
800 Rotating direction of the motor C 0 - 1 0
9
985 Switch on angle for thread trapper B,C 0 - 255 67
986 Switch off angle for thread trapper B,C 0 - 255 206
989 Thread trapper at beginning of seam
1 = yes, 0 = no
B,C 0 - 2 0
* Adjustment see Chapter 3.01 Basic position of the machine drive unit.