Pfaff 1180 U Series, Supplement To Instruction Manual, Page: 15 / 32

Setting up
15
4
.04
Setting the stitch counting function for the bobbin thread control
Switch on the machine.
Press the
TE/Speed key to call up the parameter input function.
●
●
TE
No VAL
A
101 ON
By pressing the corresp/- key select the parameter " 760 " .
●
Press the corresp/- key to set the number of remaining stitches, which can still be
sewn after recognition by the bobbin thread control function.
The selected value is multiplied by
10* or 200** and the result is the number of stitches.
Example display 5 x 200** = 1000 stitches. The setting depends among other things on the
thread strength.
If the TE/Speed key is pressed, the value is taken over and the machine changes into the
sewing mode.
The bobbin thread rest counter can only be used, if parameter " 660 " is set at va-
lue " 1 " or " 2 " .
* If for parameter 660 the value is " 1 " , the multiplier is 10
** If for parameter 660 the value is " 2 " , the multiplier is 200
●
TE
No VAL
A
760 5
VAL
No
2x