PEUGEOT 301 Handbook Download Page 186

Page: 186 / 285

184

301_en_Chap12a_RD5(RD45)_ed01-2014

AUDIO

Audio CD

Insert 12 cm diameter circular compact discs only.
Some anti-pirating systems, on original discs or CDs copied using a

personal recorder, may cause faults which are no reflection on the

quality of the original player.
Without pressing the

EJECT

button, insert a CD in the player, play

begins automatically.

To play a disc which has already been
inserted, press the

SRC/TEL

button

several times in succession and select
"

Press one of the buttons to select a
track on the CD.

Playing a CD

Press

LIST

to display the list of tracks

on the CD.

Press and hold one of the buttons for
fast forward or backward.

Summary of Contents for 301






























































































































































































































































































Search results

Summary of Contents for 301

Reviews:

Related manuals for 301

Brands by name

Popular brands

PEUGEOT 301, Handbook

Search results

Summary of Contents for 301

Reviews:

Related manuals for 301

Brands by name

Popular brands