PEUGEOT 301, Handbook

Page: 114 / 285

112
Child safety
301_en_Chap08_securite-enfants_ed01-2014
Your vehicle has been approved in accordance
with the
latest ISOFIX regulations .
The seats, represented below, are fitted with
regulation ISOFIX mountings:
"ISOFIX" mountings
- two rings A , located between the vehicle
seat back and cushion, indicated by
a marking,
To secure the child seat to the TOP TETHER:
-
pass the child seat strap over the centre of
the vehicle's seat backrest,
- raise the TOP TETHER,
- secure the upper strap fixing to the ring B ,
- tighten the upper strap.
Observe strictly the fitting instructions
provided with the child seat.
For information on the possibilities for fitting
ISOFIX child seats to your vehicle, refer to the
table of seating positions.
- a ring B , located under a cover on the back
of the top of the seat backrest, referred to as
the
TOP TETHER for fixing the upper strap.
Its position is indicated by a marking.
The ISOFIX mountings are three rings for each seat:
The TOP TETHER is used to secure the upper
strap of child seats that have one. This device
limits forward tipping of the child seat, in the
event of a front impact.
This ISOFIX mounting system ensures fast,
reliable and safe fitting of the child seat in
your vehicle.
The
ISOFIX child seats are fitted with two
latches which are secured easily on the two
rings
A .
Some also have an upper strap (or top tether)
which is attached to ring B .
When installing an ISOFIX child seat on the
right hand rear seat, before securing the seat,
first move the centre rear seat belt towards the
middle of the vehicle, so as to not interfere with
the operation of the seat belt.
The incorrect installation of a child seat
in a vehicle compromises the child's
protection in the event of an accident.