Version E User Guide 208 Rally 4 - 22/01/2021
P 61
13.5.
AUXILIARY FUNCTIONS
13.5.1.
Throttle Pedal / Throttle Body / Wastegate Calibration
-
Master Switch OFF
-
Press the throttle pedal fully
-
Turn the Master Switch ON
-
Wait for the message “LIFT OFF” then take off the foot from the pedal.
-
If the calibration is validated, do a reset (master switch OFF then ON)
-
If the calibration has failed, redo the procedure from the start.
REMINDER: The calibration must be carried out after each replacement of engine, actuator
(throttle body, waste gate, and pedal), ECU and engine mapping.
13.5.2.
Steering wheel angle zero
-
Align the wheels in a straight line and center the steering wheel (use the straight line
spacer);
-
Master switch ON, Power OFF, Map ROAD;
-
Select page 6 “Mechanical Page 1” on the Dashboard
-
Appui long sur le bouton Rouge du clavier additionnel de la console.
NOTE: This procedure must be carried out after replacing the steering wheel angle sensor,
intervention, on the rack or steering in general, as well as replacing the ECU.
Learning
OK – Do a Reset
LIFT OFF
