PEUGEOT 208 2017, Handbook

Page: 173 / 304

8
171
In the event of a breakdown
5. Foglamp (P21W).
Light-emitting diodes – LEDs
For replacement, contact a PEUGEOT
dealer or a qualified workshop.
Reversing lamps and direction
indicators
These two bulbs are changed from inside the
boot:
F
Open the boot.
F
Remove the access grille from the
corresponding side trim panel.
F
Unscrew and remove the nut.
F
Disconnect the lamp unit connector.
F
Unclip the lamp unit and carefully extract it
pulling straight towards you.
F
Press the four tabs and remove the bulb
holder.
F
Turn the bulb a quarter turn, pull it out and
fit a new bulb.
To reassemble, proceed in reverse order.
Make sure to engage the lamp unit in its guides
while keeping it in line with the vehicle.
Tighten sufficiently to ensure sealing, but
without damaging the lamp.
Third brake lamp
F
Unscrew the fixing pins on each side of the
lamp, without removing them completely.
F
Push on the screws to unclip the lamp unit.
F
Disconnect the lamp unit connector.
F
Remove the lamp unit from the outside.
F
Turn the bulb holder corresponding to the
faulty lamp a quarter turn and pull it out.
F
Pull the bulb out and change it.
To reassemble, proceed in reverse order.