14
1-800-732-2677
Re-synchronize the System
Remove the Receiver Collar from your pet.
1.
Remove the battery from the Receiver Collar. Discharge all power by holding the
2.
correction level button down until the LED is no longer illuminated.
At the transmitter, move the Boundary Switch from the low to the high position.
3.
Slowly adjust the Boundary Control Dial up to 8, down to 1 and then back to the
4.
#4 position.
Standing within 5-10 feet of the Transmitter, reinsert the battery into the Receiver Collar.
5.
Test the Boundary and verify operation.
6.
Once you are confi dent that the system is working, reset the Transmitter controls to the
original setting.
Terms of Use and Limitation of Liability
Terms of Use
1.
This Product is offered to you conditioned upon your acceptance without
modifi cation of the terms, conditions and notices contained herein. Usage of this
Product implies acceptance of all such terms, conditions, and notices.
Proper Use
2.
This Product is designed for use with pets where training is desired. The specifi c
temperament of your pet may not work with this Product. If you are unsure whether
this is appropriate for your pet, please consult your veterinarian or certifi ed trainer.
Summary of Contents for Wireless Pet Containment System Receiver Collar
Page 18: ...18 1 800 732 2677...
Page 19: ...www petsafe net 19...
