7. Loosen the contact points, remove the test wires, and securely tighten the contact
points to the receiver.
USING YOUR UNIT
WEATHERPROOF Transmitter
Your transmitter is easy to operate. It comes equipped with an internal antenna. No
additional, external antenna is required.
Several transmitter settings have been factory pre-set. They are described below. These
settings can be modified, as detailed later in the manual, to suit your individual training
needs.
To deliver factory pre-set, momentary stimulation:
• Momentary stimulation,
or “nick,” is a quick
burst that lasts 5/100ths
of a second.
• To deliver factory pre-set
momentary stimulation,
press the large, yellow
button.
• Intensity levels vary from
1 (lowest) to 8 (highest).
• To indicate that
momentary stimulation is
being delivered, the red LED light on both the transmitter and receiver will flash.
If the light on the transmitter continues to flash, the transmitter battery will need to
be replaced.
NOTE: In the momentary mode, the stimulation burst will last 5/100ths of a second no matter
how long the button is depressed.
To deliver factory pre-set, continuous stimulation:
• Continuous stimulation is constant, up to a maximum of eight seconds.
• To deliver factory pre-set continuous stimulation, press the small, black button.
• Intensity levels vary from 1 (lowest) to 8 (highest).
• To indicate that continuous stimulation is being delivered, the red LED light on
the transmitter and receiver will remain illuminated as long as the button is pressed.
If the light on the transmitter flashes the transmitter battery will need to
be replaced.
NOTE: In the continuous mode, the stimulation will transmit for no more than eight
continuous seconds no matter how long the button is pressed. To reactivate, release and repress
the button.
5
Intensity Level Adjustment Knob
Continuous Stimulation
Momentary Stimulation
Summary of Contents for sportdog SportHUNTER
Page 1: ...SportHUNTER OWNERS MANUAL TM TM...
Page 2: ......
