www.petsafe.net
29
Troubleshooting
The Receiver Collar
tone is not sounding
when setting up the
Boundary Zone.
• The tone may be difficult to hear in a noisy environment.
• Use Test Light as explained in the “Test Light Instructions”
section, and use it to determine the location of
Boundary Zone.
• Check that the Transmitter is set up according to
directions and install a new Receiver Collar battery.
The Receiver Collar
tone is not sounding
or administering a
Static Correction.
• Check that the Transmitter is plugged into a working
120 volt outlet, turned on, the Power Light is on, and the
Transmitter controls are set at your desired settings.
• Check the receiver battery to make sure that it is
installed properly.
• Replace the battery.
The Receiver
Collar tone is
sounding everywhere.
• Check that the Transmitter is plugged into a working
standard 120 volt outlet, turned on, the Power Light
is on, and the Transmitter controls are set at your
desired settings.
