1-800-732-2677
10
Step 1—Prepare the Receiver Collar
Your Receiver Collar comes with short Contact Points installed. Use the
Long Contact Points for pets with long or thick hair. Tighten the Contact
Points using the Contact Point Wrench
(
1A
)
. Check tightness weekly.
Insert and Remove the Receiver Collar Battery
Note:
Do not install the battery while the Receiver Collar is on your pet.
This Receiver Collar utilizes a replaceable PetSafe
®
battery (RFA-67).
This unique battery is designed to make battery replacement easier and
increase water protection. Once you insert the battery and turn it to the
lock position, the unit will be turned ON.
To insert the battery, align the symbols on the battery (arrow) and
Receiver Collar (triangle) (
1B
). Use the edge of the Test Light Tool (
1B
) to
turn the battery clockwise until the arrow lines up with the lock symbol on
the housing.
To remove the battery, turn the battery counter-clockwise using the edge
of the Test Light Tool (
1C
). DO NOT attempt to cut into or pry open the
battery. Be sure to discard the used battery properly.
