www.petsafe.net 5
Panel Pet Insert Door
Flap Replacement/Horizontal Flap Adjustment:
The PetSafe
®
Panel Pet Door Insert uses two
Large PetSafe Replacement Flaps. To replace a flap, simply hold flap up and unscrew the five screws
on the back side of the Hinge Plate. Replace with a new flap and reinstall the existing five screws to
secure flap back into place. To horizontally adjust a flap, hold flap up and loosen the five screws on the
backside of the Hinge Plate. Adjust flap left or right for a snug fit and tighten screws back into place.
Vertical Flap Adjustment:
To adjust flap vertically the Interior or Exterior Cover plate will need to be
removed, depending on which flap is being modified. Use a small flat head screwdriver to remove
Finishing Plugs on the Interior or Exterior Cover. Loosen the five screws on the upper section of the
Hinge Plate and adjust flap up or down for a snug fit. Tighten screws back into place and replace
Finishing Plugs.
NOTE: Vinyl flaps shrink during cold months and stretch in warmer months and may need to be
adjusted to ensure a proper fit during seasonal changes.
Terms of Use and Limitation of Liability
1.
Terms of Use
This Product is offered to you conditioned upon your acceptance without modification of the terms,
conditions and notices contained herein. Usage of this Product implies acceptance of all such terms,
conditions, and notices.
2.
Proper Use
This Product is designed for use with pets where training is desired. The specific temperament of your pet
may not work with this Product. If you are unsure whether this is appropriate for your pet, please consult your
veterinarian or certified trainer. Proper use includes reviewing the entire Operating Guide provided with your
Product and any specific Caution statements.
Summary of Contents for PAC11-11037
Page 19: ...www petsafe net 19 ...
