16
Setting BLNK
- The intensity selection knob on top of
the S.P.O.T.™ transmitter controls the Night Sight™
brightness settings of the “BLNK” function on your
system. To adjust BLNK brightness, turn the knob to
your desired selection of 1-16 for varying levels of
brightness. While holding down the “BLNK” button
you will notice the intensity of the light increase as you
go up from 1-16 levels.
SETTING NIGHT SIGHT
TM
INTENSITY LEVEL
NOTE -
Battery life is greatly affected when leaving the
S.P.O.T.™ Night Sight™ illumination on high constant
light for long periods of time. To maximize battery life, set
the unit to low light or strobe if using for long periods of
time without charging. Charging the battery is recom-
mended after each extended use of the Night Sight™ LED
lights. Also, as the battery ages, usage time will diminish.
The Night Sight™ LED system consists of two bright
LED lights located on each side of the collar receiver.
Each light is capable of producing around 21 Lumens,
or 42 Lumens total (when set at 100% brightness).
Setting LITE
- Press the “LITE” button once and the
Night Sight™ LED light on each side will light up at
50% brightness. Press “LITE” once more for 100%
brightness. Press “LITE” once more for blink/strobe.
Press “LITE” again to shut off the lights.
General Battery Charge Life with LITE Function
Constant Light at 50% Brightness
2-3 hours
Constant Light at 100% Brightness
1-2 hours
Blinking Light at 100% Brightness
2-3 hours
