Peterbilt 365 2017, Manual

Page: 213 / 228

STOPPING THE ENGINE
1. Make sure that the vehicle frame
rail is standing on a flat and level
surface.
2. Make sure that the vehicle is
horizontal, both lengthwise and
crosswise. Check this carefully
on a vehicle with air suspension.
Note that the engine may be
inclined up to 4° depending on the
vehicle model and wheelbase.
3. Twist the dipstick handle to unlock
it, then pull the dipstick out of the
holder.
4. Wipe the dipstick clean with a
lint-free cloth.
5. Place the dipstick back into the
holder.
6. Pull the dipstick out again and
check the oil level. The oil level
should always be between the 2
marks on the dipstick.
7. Reinstall the dipstick and twist to
lock it in place.
1. Engine Oil High Level
2. Engine Oil Low Level
Topping Up the Engine Oil
1. Top up with oil, if necessary, via
the filler opening. Use the correct
grade in the correct quantity. For
oil replacement, please see engine
Operator’s Manual included with
this chassis.
2. After topping up, wait 1 minute and
check the oil level again.
3. Reinstall the oil fill cap and twist
to lock it in place.
(03/17) Y53-6076-1B1
4-55
4
https://www.besttruckmanuals.com/