Peterbilt 365 2017 Manual Download

Page: 112 / 228

STANDARD GAUGES

know what screen they are in. (Does
not indicate a fault code.)

Active Warnings

This information is accessible when
the vehicle is parked or driving.

This menu selection will display all
active warning icons. The display will
read “No Warnings” when there are no
active warnings.

Clock

This information is accessible when
the vehicle is parked or driving.

Settings Menu

This information is accessible only
when the vehicle is parked.

The Settings menu screen allows
the driver to view and/or change the
following menu items:

•

Display Format 12 Hour (AM/PM)
or 24 Hour (military)

•

Home/Local Time

•

Alarm ON/OFF

•

Alarm Time

•

Units of measure

•

Language (English, Spanish or
French)

To set clock display format:

When in the Settings Menu, scroll
through the list of menu items to
“Format”.

Press the MCS to display either 12
hour (AM/PM) or 24 hour (military)
time.

3-40

Y53-6076-1B1

(03/17)

https://www.besttruckmanuals.com/

Summary of Contents for 365 2017





































































































































































































































Search results

Summary of Contents for 365 2017

Reviews:

Related manuals for 365 2017

Brands by name

Popular brands

Peterbilt 365 2017, Manual

Search results

Summary of Contents for 365 2017

Reviews:

Related manuals for 365 2017

Brands by name

Popular brands