Peterbilt 325 2017, Operator'S Manual

Page: 87 / 392

WARNING SYMBOLS
•
Flashes continuously when the
ATC/ Deep Snow & Mud switch
is turned on, indicating that this
feature is active.
10. Brake System
Illuminates to indicate a malfunction
in the hydraulic brake system (when
equipped with Hybraulic brakes).
11. Clock, Alarm Bell
Illuminates when the alarm is set. It will
flash when the clock alarm is active.
12. Cruise Control, Active
Illuminates when cruise control is
active.
13. Dump Truck, Body Up
Illuminates when Truck Dump Body is
up.
14. Dump Truck, Trailer Body
Up
Illuminates when Trailer Dump Body
is up.
15. Emissions, Diesel
Particulate Filter (DPF)
Illuminates when diesel particulate
trap is plugged. This warning will also
illuminate when regeneration operation
is disabled.
16. Emissions, High Exhaust
System Temperture (HEST)
Illuminates when the exhaust gas
temperature and exhaust components
become extremely hot.
17. Emissions, Malfunction
Indicator Lamp (MIL)
Illuminates when an engine emissions
failure has occurred. The vehicle
can be safely driven but should be
serviced to correct the problem. The
situation should not be considered
an emergency. In some cases, the
Malfunction Indicator Lamp will activate
in conjunction with the High Exhaust
Temperature, Diesel Particulate Filter
(DPF) and Diesel Exhaust Fluid (DEF)
Warning Lights.
18. Engine, Check Engine
Illuminates when a problem exists, but
the vehicle can still be safely driven.
Vehicle should be serviced to correct
the problem but the situation should
not be considered an emergency.
19. Engine, Ether Start
(03/17) Y53-6060-1C1
3-21
3