Peterbilt 325 2017, Operator'S Manual

Page: 303 / 392

ELECTRICAL
WARNING!
Batteries release gases that are
flammable. Batteries are equipped
with vent tubes and flash arrestors
which vent battery gases out of the
cab. Ensure all vent tubes, flash ar-
restors and grommets are properly
installed and ensure they are clear
and functioning properly. Failure to
reinstall or keep the vent tubes and
grommets clear or ensure the flash
arrestor(s) are functioning properly
could result in personal injury or
equipment damage. Failure to com-
ply may result in death, personal
injury, equipment or property dam-
age.
CAUTION
Do not store other items in this bat-
tery box. Failure to comply could re-
sult in damage to the truck and/or
batteries.
CAUTION
Properly secure battery tie downs
and battery box cover when rein-
stalling batteries after service. Do
not over tighten.
Over tightening
can crack the battery case which can
lead to equipment damage.
Removing and Installing Batteries:
1. Be sure all switches on the vehicle
are turned OFF.
2. Disconnect negative ground cable
first.
3. Disconnect positive cable.
4. Unscrew bolt of holding plate with
open end wrench.
NOTE
Always dispose of automotive bat-
teries in a safe and responsible man-
ner. Contact your authorized dealer
for disposal standards. Call your lo-
cal authorized recycling center for
information on recycling automotive
batteries.
Follow the procedure below to reinstall
batteries on the vehicle:
(03/17) Y53-6060-1C1
5-93
5