Peterbilt 325 2017, Operator'S Manual

Page: 242 / 392

PREVENTIVE MAINTENANCE SCHEDULE
PREVENTIVE MAINTENANCE (PM) INTERVALS
Recommended PM
Interval
SYSTEM COMPONENT MAINTENANCE TASK
I A B C
Battery cables Check the condition of the cables, cushion clamps, nylon tie
straps, and routing. Replace a cushion clamp if the rubber has
deteriorated. Repair or tighten terminals, and secure cables
to prevent chafing. Replace damaged cables (cuts, cracks, or
excessive wear) (shown on page 5-85). X
Batteries (ON HIGHWAY &
LINE HAUL) Check for cracks and damage, electrolyte level, condition of
terminals, and tightness of holddowns (shown on page 5-85). X
Batteries (OFF-HIGHWAY) Check for cracks and damage, electrolyte level, condition of
terminals, and tightness of holddowns (shown on page 5-85). X
Battery box and tray (ON
HIGHWAY & LINE HAUL) Check the box integrity. Clean the drain tube and check for acid
leaks. Check condition of all equipment mounted under the box. X
Battery box and tray
(OFF-HIGHWAY) Check the box integrity. Clean the drain tube and check for acid
leaks. Check condition of all equipment mounted under the box. X
Battery
Boxes, Tool
Boxes, and
Steps
Battery Cable Fasteners Check battery cable fasteners and tighten as necessary to 10-15
Lb. ft. (13.6-20.3 N.m.) as specified on the battery label. X
5-32
Y53-6060-1C1 (03/17)
5