Notes: After turning on the , If the green LED indicator
turns to a blinking red light, the battery needs to be replaced.
When you set the dial on the 5 Level, it may be sensitive
enough that the No Bark Collar can be activated easily by a small
sound or tap.
No Bark Collar: 1X4LR44/6V
3. Test by scratching the
surface of the test tool
rough
on the
using a fingernail
(as shown in the diagram)
or pen.
collar turns to a blinking
green light. Then repeat
the same process if you
want to try it again.
The green light on the top of
2. Set the Sensitivity Dial to the 5 Level.
,,
,,
Testing
1. Turn the on by turning OFF & Intensity Dial and set to
the intensity level you prefer.
,,
,,
,
Owner s Manual
PET851