Permon SKA 12, Operation Manual

Page: 8 / 12

S T O R I N G
www.permon.cz SKA 12-B, D, DZ
Do not use hydraulic oils or unstabilized coleseed oils
for lubrication.
Before storing the tool for over three weeks, conserve
it using mineral oil (see Storing).
Do not use ecological oils for conservation.
Recommended ecological oils:
BP BIOHYD SE 46, ÖMV BIOHYD M 32,
TOTAL HYDROBIO 46, TopOil BIO UNI
Recommended mineral oils:
PARAMO PNEUMAT 46
STORING
Before storing the tool for over three weeks, it needs to be
conserved.
Conserve the hammer by pouring cca. 50 cm
3
(0.5 dcl)
of mineral oil into the air inlet and running it shortly to
coat its internal parts with oil.
Oil may leak from the oiler during prolonged storing.
Empty the oiler before storing.
Store the hammer in dry conditions
–
protected from
weather factors and relative humidity below 75%.
Do not store the hammer close to corrosive chemicals
or gases.
In proper storage conditions, the hammer can be stored for
a year and spare parts for a year and a half without re-
conservation.
DELIVERING
The hammer is delivered separately, including this manual
and a certificate of warranty.
By default, we deliver the
¾'' Quick Coupling
as the joint
for the supply hose. Alternatively, the quick coupling can be
replaced by a cap nut with a socket, which can be attached
to the ¾“ threaded socket.
The cap nut (item no. 319 257) can be combined with:
Ø13 socket (item no. 319 264)
Ø16 socket
(item no. 319 255)
Ø20 socket (item no. 319 256)
Low temperatures
Presence of condensate in
air
coupled with low
temperatures can cause the
hammer to freeze up.
Add an AOV 6 water
separator or the SOOR unit
before the hammer and as
far
away from the
compressor unit as possible
(min. 20 m).
Ordering spare parts
All hammers are
manufactured in accordance
with drawing documentation
to ensure interchangeability
of all components.
Please state the hammer
type, name, quantity and
item no. of the desired
component in your order
form.
Example: SKA 12-B
Piston 5003-691 1pc
7