ROHO AGILITY CARBON Contour Back Support Operation Manual
2
Intended Use
The ROHO
®
AGILITY CARBON
®
Contour Back Support (AGILITY CARBON) is a lightweight back support replacement for a wheelchair and is intended to
provide trunk/pelvis support and positioning. AGILITY CARBON has a weight limit of 265 lbs. (120.2 kg). Models include:
-
ROHO
®
AGILITY CARBON
®
Min Contour Back Support (AGILITY CARBON Min)
-
ROHO
®
AGILITY CARBON
®
Mid Contour Back Support (AGILITY CARBON Mid)
A clinician who is experienced in seating and positioning should determine whether the product is appropriate for the individual’s particular seating needs.
The product’s intended use statement alone should not be relied upon to make that determination.
The medical products featured in this document are intended to be only one part of an overall care regimen that includes all seating and mobility equipment
and therapeutic interventions. A clinician who is experienced in seating and positioning should identify this care regimen after evaluating the individual’s
physical needs and overall medical condition.
A clinician should also evaluate for visual, reading, and cognitive impairment to determine the need for caregiver assistance or the need for other assistive
technology, such as large-print instructions, to ensure proper product use.
Important Safety Information
Warnings:
-
DO NOT use the product without first reading and understanding
this manual. If you are unable to perform any of the tasks in this
manual, seek assistance by contacting your clinician, equipment
provider, distributor, or Customer Support.
-
Follow all instructions and safety information provided with the
product and provided by the manufacturer of your wheelchair or
other accessories.
-
Skin/soft tissue breakdown can occur due to a number of
factors, which vary by individual. Check skin frequently, at least
once a day, especially those areas covering bony prominences.
Redness, bruising, or darker areas (when compared to normal
skin) may indicate superficial or deep tissue injury and may need
to be addressed. If there is any discoloration to skin/soft tissue,
STOP USE immediately. If the discoloration does not disappear
within 30 minutes after disuse, immediately consult a healthcare
professional.
-
The product should be installed and adjusted by a qualified and
competent medical equipment provider or licensed healthcare
professional.
-
The product must be sized correctly to the individual and the
wheelchair.
-
As with any addition to a wheelchair, the product may affect
your wheelchair’s stability. Before using the product, consult
with a clinician to determine whether your wheelchair requires
additional modifications.
-
DO NOT lean over the top of the product. Doing so may cause
a change in the center of gravity, and the wheelchair could tip
over.
-
Check daily to confirm tightness of the screws. Retighten loose
screws, following instructions in this manual. Check daily for
wear or breakage. DO NOT use the product if any part cannot
be tightened or is broken. Periodically, the product should be
thoroughly inspected by a qualified technician.
-
Keep small hardware components out of the reach of children
and any individuals who have a tendency to place inedible
objects in their mouths. Swallowing or inhalation may lead to
serious injury or death. IMMEDIATELY seek emergency medical
assistance.
-
DO NOT lift or push a wheelchair using any part of the product
because it may become detached from the wheelchair.
-
Wheelchair Compatibility: Wheelchairs with rigidizer bars may
not be compatible with the product, as the rigidizer bar may
interfere with angle and/or height adjustment. Consult with an
equipment provider to determine if the product is compatible
with your wheelchair.
-
Do not expose the product or components to high heat, open
flames or hot ashes. Testing or certification claims, including
for flammability, may no longer apply to this device when it is
combined with other products or materials. Check testing and
certification claims for all products used in combination with
this device.
-
Metal components may become hot if exposed to high
temperatures or cold if exposed to low temperatures. The cover
assembly surface will acclimate to the surrounding temperature.
Take appropriate precautions, especially when the product will
contact unprotected skin.
Warnings - Motor Vehicle Transportation
-
The product is NOT designed to be used for seating in a motor
vehicle, and DOES NOT meet federal standards for motor vehicle
seating. The risk of an accidental disconnection that could result
in a fall and potential serious injury has not been assessed.
-
ALWAYS transfer to an approved vehicle seat before the vehicle
begins moving.
-
ALWAYS store the product safely during transport to avoid
damage. If the product has been involved in an accident during
transport, see the “Maintenance” section in this manual.