1. From drive mode, press and hold soft key #3 (top
right blue button on OMNI2 display, Image 1) to
enter settings menu.
2. Using navigation buttons on display, scroll down to
“Bluetooth”, right navigation button to select.
3. Scroll to desired Bluetooth device (”Mouse 1” or
“Mouse 2”), right or left command to turn <on>.
4. Scroll to “Exit” at bottom of screen, right command
back to settings menu.
5. Scroll to “Exit” at bottom of settings menu, right
command to “Exit”.
6. Power cycle wheelchair, wait approximately 8
seconds, power cycle again.
1. Use mode button on OMNI2 display to enter Bluetooth
Mode. Option to access via User Menu.
2. If more than one device paired, scroll to desired device
and select with right command of input device plugged
into OMNI2.
3. Put in discoverable mode by activating forward
command of input device for 10 seconds or until you
hear a beep, repeat by activating reverse command for
10 seconds or until you hear a second beep.
DOC0119-00
www.permobil.com
Pairing OMNI2 with device
Permobil OMNI2 quick start guide
iDevice Bluetooth™ mouse access for iPhone, iPad, & iOS software version 13.0 or later
Activating Bluetooth mode
Mode
Settings
On/Off
Profile
Navigation
Buttons
OMNI2 Display
Image 1
NOTE: Due to variability in Bluetooth functionality and required components when using an alternative drive control, please contact Permobil should you need additional assistance. There may be minor variation in
stated directions depending on version of iOS on device. Please contact Apple Accessibility directly for further assistance if desired.
