Permobil M400 Corpus HD, Service Manual, Page: 48 / 100

M400 Corpus HD
Repairs - Chassis
Figure 78. The rear seat support is fitted with two
screws
6. Remove the rear seat support, it is fitted with two screws.
4.2.2.2 Mounting the seat support
1. Fit the rear seat support, it is fitted with two screws.
2. Remount the electronics, make sure the locking mechanism on the
left and right handside of the chassis are placed into correct position.
3. Fit the front seat support, it is fitted with one screw.
4. Remount the front and upper chassis cover. See
4.2.1.2
Mounting the front chassis covers, Page 43 and
4.2.1.6 Mounting the upper chassis covers, Page 44.
4.2.3 Batteries
4.2.3.1 Removing batteries
WARNING!
Replacing batteries and circuit breakers
Always turn the main circuit breaker to the Off position when replacing
batteries or circuit breakers.
Exercise caution when using metallic objects during work with batteries. A
short-circuit can easily cause an explosion. Always use protective gloves and
goggles.
The following tools are necessary for this task:
• Wrench 10 mm
1. Place the wheelchair on a level surface.
2. Run/fold out the leg rest and raise the seat lift.
3. Turn off the main power switch on the control panel.
48