Permobil M400 Corpus HD, Service Manual, Page: 34 / 100

M400 Corpus HD
Repairs - Seat
Figure 46. The adjustment bar brackets are each held in
place by two screws.
10. Remove the adjustment bar brackets, which are each held in place
by two screws.
Figure 47. Screw the adjustment bar down far enough
to be able to prize it up out of the groove on the
backrest profile.
11. Screw the adjustment bar down far enough to be able to prize it up
out of the groove on the backrest profile.
4.1.10.2 Mounting the armrest height adjustment
mechanism
Figure 48. Apply thread locker.
1. Push the threaded rod into the backrest profile and at the same time
screw on the driver (1).
2. Apply thread locker (Loctite 2701) to the ends of the threaded rod
and fit the two end pieces (2 & 3) onto the threaded rod.
Figure 49. The adjustment bar brackets are each held in
place by two screws.
3. Assemble the adjustment bar brackets, which are each held in place
by two screws.
34