Permobil M400 Corpus HD, Service Manual, Page: 21 / 100

M400 Corpus HD
Repairs - Seat
Figure 15. The seat mounting plate is mounted in
position (B). The four screws are mounted in position (2)
according to table below.
5. Remove the four screws that hold the seat mounting plate in place.
The seat mounting plate can be mounted in three different
positions, depending on the depth of the seat. Note the position the
seat mounting plate is mounted in for future reference.
Lift the seat mounting plate off the seat lift/seat column.
4.1.2.2 Mounting the fixed seat mounting plate
Figure 16. The mounting position for the Fixed Seat
Mounting Plate (A) and the Seat stabilizer (B). Bracket
depends on the seat depth setting.
1. Mount the Seat stabilizer brackets in the correct position, they
should be mounted in different positions depending on the seat
depth setting. See Table 1. Use a torque wrench to tighten the
screws. Tightening torque 18 lb·ft.
Figure 17. The seat mounting plate is mounted in
position (B). The four screws are mounted in position (2)
according to table below.
2. Mount the fixed seat mounting plate in the correct position using
the four screws. It should be mounted in different positions,
depending on the seat depth setting. The mounting position is
defined by the position of the seat post. See Table 1. Use a torque
wrench to tighten the screws. Tightening torque 18 lb·ft.
Table 1 The mounting position is defined by the depth of the seat
Seat Depth
Position Seat stabilizer
bars Position Tilt to
center hole in
seatpost Tilt mechanism
Mounting holes
no:
1: 18.5 in 2 + 5 A 1 + 1
2: 19.5 in 2 + 5 B 2 + 2
3: 20.5 in 2 + 5 C 3 + 3
4: 21.5 in 1 + 4 D 4 + 1
5: 22.5 in 2 + 5 E 4 + 1
6: 23.5 in 2 + 5
F
4 + 2
7: 24.5 in 2 + 5 F 4 + 2
21