Permobil F3 Corpus, User Manual

Page: 260 / 274

F3 Corpus
Troubleshooting
8.1 Troubleshooting guide
The following troubleshooting guide describes a number of faults
and events which may occur when you use the wheelchair, together
with suggested remedies. Note that the guide cannot describe all the
problems and events which may occur and you should always
contact your service provider or Permobil should you have any
doubts.
Event
Possible cause Remedy
The wheelchair does not start. Batteries discharged. Charge the batteries.
The cable connection to the control
panel has come loose. Insert the cable in the control panel.
Main circuit breaker switched to off
position after e.g. battery replacement.
Reset the main circuit breaker. See
page 246.
Main circuit breaker tripped.
See page 246.
The wheelchair cannot be driven. Battery charger connected. Stop charging. Disconnect the charging
cable from the wheelchair charger socket.
Brake release activated. Reset the brake release.
Wheelchair locked. Unlock the wheelchair.
The wheelchair switches itself off after a
certain period of inactivity (1 - 30 min). The electronics’ energy-saving mode has
been activated. Switch the wheelchair on again using the
start button on the control panel.
260