Permobil F3 Corpus User Manual Download

Page: 165 / 274

F3 Corpus

4.2.2

Manual brake release

Figure 150. Release lever location.

The wheelchair is fitted with two manual brake releases acting on
the magnetic wheel locks to allow manual movement of the
wheelchair.

WARNING!

Wheel locks

Do not release or engage the wheel locks unless power to the wheelchair is
off.

To prevent the wheelchair rolling away, make sure it is on a level surface
before releasing the wheel locks.

Be aware that the wheelchair has no brakes when the wheel locks are in
free-wheel position.

Make sure that the person pushing the wheelchair has full control when the
wheel locks are released.

Always engage the wheel locks after the wheelchair has been pushed
manually.

165

Summary of Contents for F3 Corpus



















































































































































































































































































Search results

Summary of Contents for F3 Corpus

Reviews:

Related manuals for F3 Corpus

Brands by name

Popular brands

Permobil F3 Corpus, User Manual

Search results

Summary of Contents for F3 Corpus

Reviews:

Related manuals for F3 Corpus

Brands by name

Popular brands