Permobil F3 Corpus User Manual Download

Page: 151 / 274

F3 Corpus

Preparing for use

4.1.6

Footplates

WARNING!

Risk of injury while adjusting footplates

Do not place any weight or load on the footplates while adjusting the
footplates.

4.1.6.1

Footplate height

Figure 135. Adjusting footplate height.

The height of the footplates is individually and steplessly adjustable.
They are secured using the two outer locking screws.

Remove the leg support cover.

Undo the footplates’ locking screws.

Adjust the footplates to the required height and secure by
tightening the locking screws.

Check that the footplates are fully secured.

Replace the leg support cover.

151

Summary of Contents for F3 Corpus



















































































































































































































































































Search results

Summary of Contents for F3 Corpus

Reviews:

Related manuals for F3 Corpus

Brands by name

Popular brands

Permobil F3 Corpus, User Manual

Search results

Summary of Contents for F3 Corpus

Reviews:

Related manuals for F3 Corpus

Brands by name

Popular brands