BodiLink Lateral Trunk Support Operation Manual
7
PW1 - Quantum
PW2 - Permobil
PW3 - Quickie
PW4 - Rovi
PW5 - Avid
B
C
A
Permobil PW2 Mounting Block and
Seat Frame Track Shown
Track Slots
Removable Mounting
Bracket Shown
Release Lever
Note: For removable hardware, the release
lever can be installed towards the front or rear
of the wheelchair, pointing either up or down,
depending on user/caregiver preferences.
INSTALLATION - POWER MOUNT TT HARDWARE
Attaching TT hardware to the seat frame tracks: Permobil, Quantum, Quickie, Rovi, & Avid Rehab.
All required tools are provided.
1
Loosen the screws (A), connecting the hardware mounting block (B) to the double nut(s) (C) using the 5mm hex key.
A gap between the mounting block and the double nut(s) is needed to slide into the seat frame track.
2
Attach the hardware mounting block (B) to the seat frame track by sliding the double nut(s) (C) inside of the seat
frame track. Some wheelchairs may require temporary removal of a cap at the end of the track for this step. Slide the
hardware to the general location on the seat frame track for the desired pad and hardware placement.
3
Do not fully tighten the screws (A). Continue with pad and hardware ADJUSTMENT and USE instructions in this manual.
Summary of Contents for Comfort M2 BodiLink LPTS
Page 1: ...BodiLink Lateral Pelvic Thigh Supports OPERATION MANUAL ...
Page 2: ......
Page 63: ......
Page 64: ...permobilus com OM BL LPTS AMR REV 2020 03 04 ...
