BodiLink Lateral Trunk Support Operation Manual
11
INSTALLATION - EXTRA LINK(S) TO GT HARDWARE
For adding extra hardware link(s) to GT hardware. All required tools are shipped with GT mounting hardware.
WARNING:
Adding additional links to the hardware may reduce the overall strength.
WARNING:
Make sure that the teeth on all link joints are properly
aligned and engaged before final tightening. Failing to do so could cause wear
on the teeth, leading to parts slipping out of adjustment or hardware failure.
(GT Hardware only)
*Gear Teeth Alignment
1
Remove the screw (A), safety washer (B), and spring (C) from the hardware joint using the 5mm hex key. Retain the
screw, washer and spring for the additional link.
Suggestion: If adding multiple links to one assembly, first line up the extra links and fasten with the screws, washers and springs
provided to create one extra link assembly.
2
Line up the extra link(s) (E) with link (D) and fasten with screw (F), washer (G), and spring (H) included with the extra link.
3
Line up the extra link(s) (E) with link (J) and fasten with screw (A), washer (B), and spring (C) that were retained in step 1.
4
Continue with pad and hardware ADJUSTMENT and USE instructions in this manual.
Fixed GT Hardware Shown
A
A
F
B
B
G
C
C
J
E
D
H
Summary of Contents for Comfort M2 BodiLink LPTS
Page 1: ...BodiLink Lateral Pelvic Thigh Supports OPERATION MANUAL ...
Page 2: ......
Page 63: ......
Page 64: ...permobilus com OM BL LPTS AMR REV 2020 03 04 ...