Permobil Chairman HD3, Service Manual, Page: 8 / 32

Fig. 8. The front cover is attached by two
screws at the front edge.
Fig. 7. Chassis cover attachment points.
8
Covers
Removal
1. Raise the seat to its highest position.
2. Remove the battery cover first, it is attached
by two knobs on each side. The cover can be
removed more easily if the brake release
lever is in the forward position.
3. Remove the rear cover, it is attached by five
screws. Unscrew the rubber pads on the seat
support. Disconnect the rear light cable at the
connector in the cable.
4. Remove the seat elevator cover, it is attached
by two screws on the top of the chassis.
5. Remove the front cover, it is attached by two
screws on the front edge.
Fitting
Fitting is the reverse procedure.
Covers
A
B
C
D
A. Front cover
B. Seat elevator cover
C. Battery cover
D. Rear cover