Permobil Chairman HD3, Service Manual

Page: 19 / 32

19
Seat elevator cables & Seat elevator motor
Seat elevator cables
Removal
1. Remove the seat elevator, follow points 1-10 on the previous page.
2. Remove the seat elevator senders. Note the position of the senders for refitting, see figs. 33:2-34.
Fitting
Fitting is the reverse procedure.
Fig. 36. The motor is attached by three bolts. Fig. 35. Seat elevator motor
electrical connections.
Blue
Green
Fig. 33. Seat elevator senders.
1
2
Fig. 34. Attachment of the senders
to the seat elevator.
4 2 3 2 1 5 6 7
Seat elevator motor
Removal
1. Remove the seat elevator, see page 18.
2. Disconnect the seat elevator cable at the motor; note the position of the cable for refitting.
3. Remove the three mounting bolts, see fig. 36.
Fitting
Fitting is the reverse procedure.
1. Screw
2. Microswitch plate
3. Switch
4. Insulating plate
5. Seat elevator
6. Plate
7. Nut