Column Refrigeration Service Manual
107
8.18 Leveling/Alignment
Move the unit near the opening. Plug the power
cord into the grounded outlet and roll the unit into
position. Push unit into place.
Front and rear leveling legs can be adjusted from
the front once the unit is positioned. To access
leveling adjustment access holes, remove toe kick
grill.
Once the unit is in position, height adjustment
can be made from the front. Using the hex driver
leveling tool, turn clockwise to raise the unit or
counterclockwise to lower.
See figure 8-21
.
When the unit is properly leveled, door adjustments
are less likely to be needed.
To reduce the possibility of the unit tipping forward,
the front leveling legs must be in contact with the
floor.
The refrigerated cabinet should be level for proper
operation, such as door closing, drawer and shelf
slide operation.
CAUTION
WARNING
Figure 8-21. Leveling/Alignment
