213
Serial Port Profiles
Embedded
When this option is selected, the address of the slave Modbus device is
embedded in the message header.
Default:
Enabled
Remapped
Used for single device/port operation. Older Modbus devices may not include a
UID in their transmission header. When this option is selected, you can specify
the UID that will be inserted into the message header for the Modbus slave
device. This feature supersedes the Broadcast feature.
Default:
Disabled
Remap UID
Specify the UID that will be inserted into the message header for the Slave
Modbus serial device.
Range:
1-247
Default:
1
Enable IP Aliasing
When enabled, allows for multiple requests to serial slaves (from an Ethernet
Master/s) to be processed simultaneously.
Default:
Off
for details about setting the IP address to be used with this
serial port.
Enable SSL/TLS
using global
settings
When enabled, Modbus Slave Gateway messages to remote TCP Modbus
Masters are encrypted via SSL/TLS.
Default:
Disabled
