Perkins 1300 EDi Series, Workshop Manual, Page: 45 / 264

3
Workshop Manual, TPD 1353E, Issue 3 33
Peregrine EDi and 1300 Series EDi
Valves and valve springs
To remove Operation 3-10
Warning! Eye protection must be worn during this operation.
1 Remove the cylinder head, see Operation 3-8. Put the cylinder head on a surface that will not damage its
face.
2 Use a valve spring compressor to compress the valve spring.
3 Remove the collets (A1).
4 Release and remove the valve spring compressor.
5 Remove the valve rotator (A2), the valve rotator seal (A3), the valve spring (A4), the valve seal assembly
(A5) and the valve (A6).
6 Separate the inlet valve springs from the exhaust valve springs. They are rated differently.
7 Discard the valve seal assemblies.
W077
A
1
2
3
4
5
6
This document has been printed from SPI². Not for Resale