Perkins 1300 EDi Series, Workshop Manual, Page: 31 / 264

2
Workshop Manual, TPD 1353E, Issue 3 19
Peregrine EDi and 1300 Series EDi
Recommended torque settings
Notes:
l
The torque tensions below apply to components lubricated lightly with clean engine oil before they are
fitted.
l
The setscrew for the upper idler gear is supplied with a sealant on its thread. Do not put lubricating oil on
the thread of this setscrew.
Standard torques
Specific torques
Thread
size
Flanged head fasteners Non-flanged head fasteners
Nm lbf ft kgf m
Spanner size
mm
Nm lbf ft kgf m
Spanner size
mm
M6 x 1 11 8 1,1 8 8 6 0,8 10
M8 x 1,25 24 18 2,5 10 20 15 2,1 13
M10 x 1,5 49 36 5,0 13 41 30 4,1 16
M12 x 1,75 83 61 8,4 15 69 51 7,1 18
M16 x 2 209 154 21,3 21 174 128 17,7 24
Description Nm lbf ft kgf m
Aspiration system
Setscrew, breather pipe, bottom 49 36 5,0
Setscrew, breather pipe, top 83 61 8,4
Setscrews, turbocharger to exhaust manifold 66 49 6,8
Setscrews, turbocharger compressor housing to backplate 23 17 2,35
Setscrews, turbocharger turbine housing to bearing housing 13 9.6 1,3
Auxiliary equipment
Nut, air compressor drive gear 149 110 15,21
Setscrews, air compressor mounting bracket to engine 115 85 11,9
Setscrews, air compressor to engine 62 46 6,4
Setscrews, air compressor to mounting bracket 66 49 6,7
Cooling system
Setscrews, coolant filter flange to timing case 26 19 2,6
Setscrews, fan drive 22 16 2,2
Setscrews, fan drive pulley 7 5.5 0,8
Setscrews, fan belt tensioner to timing case 50 37 5,1
Setscrews, coolant pump pulley 7 5.5 0,8
Fasteners, coolant pump to timing case cover 7 5.5 0,8
Crankshaft assembly
Setscrews, main bearings See Operation 5-8
Setscrews, main bearings (engine serial number 850000 or more) See Operation 5-8
Setscrews, pulley / damper assembly 217 100 22,0
Setscrews, rear oil seal housing to cylinder block 24 18 2,5
Cylinder head assembly
Setscrews, cylinder head See Operation 3-9
Setscrews, engine lift brackets 60 44 6,0
Setscrews, exhaust manifold to cylinder head 81 60 8,3
Setscrews, rocker cover 18 13 1,8
Setscrews, supply manifold to cylinder head 27 20 2,8
Flywheel and flywheel housing
Setscrews, flywheel 136 100 13,8
Setscrews, flywheel housing 108 80 11,0
This document has been printed from SPI². Not for Resale