Environmental Requirements for the TGA 8000 . 17
Pollution Degree 2
This product will operate safely in environments that contain nonconductive foreign matter up
to Pollution Degree 2 in EN/IEC 61010-1.
Normally only non-conductive POLLUTION occurs. Occasionally, however, a temporary
conductivity caused by condensation must be expected.
South Korea
Ingress Protection
The TGA 8000 is rated IP20 as defined in IEC 60529.
Storage Conditions
The TGA 8000 may be stored under the following conditions:
•
ambient temperature from –20°C to +60°C (–4°F to +140°F)
•
ambient relative humidity from 20% to 80% noncondensing
•
altitude in the range of 0 – 12,000 m
Summary of Contents for TGA 8000
