PerkinElmer SPECTRUM TWO N, User Manual

Page: 118 / 125

118 . Spectrum Two N User's Guide
Appendix 1: Connector Details
Port Description Connector
Type
Voltages Maximum
Currents
A USB
This is the standard interface
between the PC and the
instrument.
USB
(Type B)
– –
B ETHERNET 100 Base-T Ethernet
connector. This is the standard
interface between a Local Area
Network (LAN) and the
instrument. It can also be used
to connect direct to the PC.
Ethernet <5 V <100 mA
C EXT
DETECTOR
This port enables to you power
the optional Wireless Router or
connect an external accessory.
Female high-
density 15-way
d-connector;
±CAN-bus;
i-button
+12 V
output
500 mA
−12 V
output
100 mA
Analog
inputs
±12 V max.
1K5 ohm
0 V
E DC Power The DC power port is used to
connect the spectrometer to
the power supply. You can use
the mains power supply
adaptor and cable supplied, or
you can use the optional
battery pack or car adaptor.
18 V 3 A