Installing Your RamanStation 400 .
51
Switching on the Instrument
1.
If appropriate, attach the alignment camera (L1320288) to the sample stage using the
two screw pins as shown in Figure 18, and then connect the USB cable to the socket
labeled
.
Figure 18 Installing the alignment camera
2.
Insert the key into the laser power
key switch on the rear panel of the
RamanStation 400 and ensure that it is turned to the ARM position.
The RamanStation 400 is supplied with two keys. One should be placed in the
instrument the other should be stored in a safe place. Replacement keys (L1323503)
can be obtained from PerkinElmer. A laser safety officer or Lab manager can control use
of the instrument with these keys.
3.
If your instrument is fitted with a deep depletion CCD, connect the 7.5 V PSU
(L1323525) from the
DD POWER
socket on the rear panel to a mains power socket.
4.
If your instrument is fitted with a deep depletion CCD, connect the Tygon tubing
between the water recirculator (L1323010) and the
WATER IN/OUT
sockets on the rear
panel, fill the storage tank of the cooler with deionized water, and then plug in and
switch on the recirculating cooler.
For more information about the recirculating cooler, see the operating manual supplied
with the system.
Figure 19 Connecting the water recirculator to the RamanStation 400
From instrument
To recirculator
Power
switch
Summary of Contents for RamanStation 400
