manualshive.com logo in svg

PerkinElmer AAnalyst 700, User Manual

Share
Download
PerkinElmer AAnalyst 700 User Manual Download Page 37

Safety/Regulatory Information

0993-5255

1

-29

Symbols used on the instrument 

Any of the following symbols can be used on the instrument:

This symbol indicates that there is a potential hazard and that the user must look 
in the guide for an explanation of the hazard and how to avoid it.

This symbol indicates the risk of electric shock.

This symbol indicates the risk of hot surfaces.

This symbol indicates the off position of the main power switch or circuit 
breaker. With the switch in this position, the instrument is disconnected entirely 
from the line power supply.

This symbol indicates the on position of the main power switch or circuit breaker. 
With the switch in this position, the instrument is connected to the line power 
supply but is not necessarily switched on and operational.

This symbol indicates the operational on/off switch.

This symbol indicates alternating current.

Summary of Contents for AAnalyst 700



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands