PerkinElmer 200 UV/VIS Series, User Manual

Page: 121 / 177

Setting Configuration Options Configuring the Detector
6 - 11
Setting the System Clock
If the default time or date set on the system clock is not correct for your time zone, you can
use the System Clock Screen to change the date or time. The system clock is also used to
time stamp errors that appear in the error log. When you press the CLK softkey, the Detec-
tor displays the System Clock Screen.
To set the day, press F1 . The first character field in DATE (“12”) becomes highlighted.
Use the numeric keys to enter the new day.
To move to the month character field (“15”) in DATE, press F2 and use the numeric
keys to enter the new month. Set the year and the hour and minute values in the same way,
that is, by pressing the appropriate function and using the numeric keys to enter the new val-
ues.
DAY
MNTH
SYSTEM CLOCK SCREEN
From the Instrument Setup Screen, press F4 to move to the System Clock Screen.
CLK
1
2
3
To accept and save the change(s) and return to the Instrument Setup Screen, press
the
key.
To cancel changes and return to the Instrument Setup Screen press the key.
return
quit
F1 F2 F3 F6 F7