PerkinElmer 200 UV/VIS Series, User Manual

Page: 100 / 177

Using Method Mode Viewing the Chromatogram
4 - 20
Viewing the Chromatogram
Press the View key to display the detector baseline prior to a run, or to display the chromato-
gram after the detector has been placed into run. The default scale for the Y axis is 1.0
AUFS. For the X axis, the time is 20 minutes when the detector is in the Ready state. At run,
the X axis displays the chromatogram for the total analysis time of the running method.
The up/down arrows decrease/increase the Y scale by a factor of two over the range 1.0 to
0.001 AUFS.
The following procedure describes how to view the chromatogram graphically.
MAIN METHOD SCREEN
To view the chromatogram, press F1 from the Main Method Screen. The View
Screen, similar to the one below, appears.
VIEW
1
F1
When you are finished viewing the chromatogram, press the key to return to the
current method.
return
2
VIEW SCREEN