Pericom Software Compaq t5300, User Manual

Page: 299 / 342

C-27
Host Command Summary
Enable host protect ESC & :
Enable OIA divide line ESC * :
Enable read unprotected field ESC % :
Host message write ESC = *message ESC =
Host message display ESC # ;
Set character attribute ESC 4 *attrib *operation
Set field attribute ESC 3 *attrib *attrib *operation
Set field attribute response ESC 3 *attrib *attrib
Create 1 viewport 24 rows x 80 chars ESC SP r ! ! SP 8 " P
Create 1 viewport 25 rows x 80 chars ESC SP r ! ! SP 9 " P
Create 1 viewport 24 rows x 132 chars ESC SP r ! ! SP 8 $ D
Create 1 viewport 25 rows x 132 chars ESC SP r ! ! SP 9 $ D
Create 2 viewports in 80 column screen ESC SP r " ! SP *r1 " 0 " SP *r2 " P
Create 2 viewports in 132 column screen ESC SP r " ! SP *r1 $ $ " SP *r2 $ D
Create 3 viewports in 80 column screen ESC SP r # ! SP *r1 " 0 " SP *r2 " 0 # SP *r3 " P
Create 3 viewports in 132 column screen ESC SP r # ! SP *r1 $ $ " SP *r2 $ $ # SP *r3 $ D
Note: The ASCII character values of *r1, *r2 and *r3 are listed below. When creating two
viewports, *r1 + *r2 must be 24 or 25. When creating three viewports, *r1 + *r2 + *r3 must be
24 or 25.
Rows ASCII Rows ASCII Rows ASCII Rows ASCII
1 ! 8 ( 14 . 20 4
2 " 9 ) 15 / 21 5
3 # 10 * 16 0 22 6
4 $ 11 + 17 1 23 7
5 % 12 , 18 2 24 8
6 & 13 - 19 3 25 9
7 '
Select active partition command/response (not model 11) ESC ! q *
Select host partition command/response (not model 11) ESC SP q *
* A = Viewport 1, B = Viewport 2, C = Viewport 3
Jump partition command/response (not model 11) ESC " A
Enable partition separator line (not model 11) ESC + :
Disable partition separator line (not model 11) ESC + ;
EDITING
Delete character ESC Q
Delete line ESC O
Erase to end of field/line ESC I
Erase to end of page ESC J
Erase input ESC K
Insert character ESC P *character
Insert line ESC N
GENERAL OPERATION
Bell BEL
Cancel ESC S or CAN
Disable write Null ESC " ;
Enable write Null ESC " :
Line turnaround character (if selected) ETX, CR, EOT or DC3